| China Huanrun Micro Beer...microbeer |
There are no special requirements on the installation site - 2020年10月26日(月)
The welding rod adopts stainless steel electrode, ER308L, all adopt the tungsten argon gas shielded welding process; 2. The special internal tie rod structure makes the mechanical performance more reasonable. How is the stainless steel combined water tank made? Understand briefly.There are no special requirements on the installation site. Again aggravate corrosion. Standard molded board; free assembly, no need to hoist equipment. After making and installing, make full water test.
The stainless steel combined water tank is the most widely used alternative to the FRP water tank in the construction industry. The most effective methods currently use polymer composite materials, among which the Fuschlan series are more mature. The shape should meet the requirements of the user, and the volume can meet all design requirements. The traditional repair welding method is more difficult, and thermal stress will cause craft beer brewery equipment greater damage to the equipment; brushing epoxy-type corrosion-resistant materials will cause cracks and peeling due to the surface adhesion and expansion coefficient.
After the installation of the water tank is completed, clean and decontaminate inside and outside. Before welding, the groove should be grooved according to the regulations of GB/T985-1998, and the outer dimension of the weld should conform to the regulations of JB/T794-1999 And to ensure that there is no false welding, no slag inclusion;The stainless steel combined water tank uses a special sealing strip and a fully bolted connection structure, which is easy to assemble, and will not leak or leak tightly. The surface is smooth, no cracks, no bubbles in the welding seam, and the lining structure must be well-balanced and free of burrs.
Because the material does not contain nickel, the corrosion and leakage problems of the welding part of the water tank during use are more common. For different equipment, different operating conditions, and different forms of corrosion and leakage, the use of corresponding technical products can quickly, simply and effectively protect the equipment, especially due to the comprehensive performance of polymer composite materials such as chemical corrosion resistance and bonding performance It avoids the adverse effects of traditional repair welding and protection of traditional anti-corrosion materials, makes the repaired equipment life even longer than new equipment, fundamentally solves the cause of corrosion and leakage, helps companies improve equipment management and reduce maintenance Cost and improve the competitiveness of enterprises.The stainless steel combined water tank is generally made of Cr stainless steel
...
|
