| China Huanrun Micro Beer...microbeer |
the blockage in the wine tube is blown out with high-pressure gas to clean up - 2020年09月22日(火)
It can be listened in a quiet environment. If there is the sound of metal or plastic friction and impact, it can be judged that there is a problem with the part, and the noise source needs to be found and adjusted. If there is wine flowing to the draft beer machine, and the draft beer machine also has the wine flowing to the wine column, it means that there is a blockage in the mouth of the faucet, and the faucet needs to be removed, and the blockage in the wine tube is blown out with high-pressure gas to clean up.
The following introduces you the common faults and treatment measures of draft beer machine: The failure of the faucet to release wine may be caused by a foreign matter in the wine pipe pipeline. When there is a problem with the draft beer machine, no matter whether the fault is difficult or easy, you must carefully check and eliminate the problem in time.
If there is wine flowing to the draft beer machine, but the draft beer stainless steel beer tanks factory machine does not flow to the wine column, it means that the draft beer machine If the wine tube is clogged, the wine tube in the draft beer machine needs to be removed, and the blockage in the wine tube is blown out with high-pressure gas to clean up.
If it is the sound of the fan driving the airflow, it is normal and requires no maintenance. Such operations require refrigeration electrical maintenance qualified personnel to repair. Remedy: Observe the vertically upward wine outlet hose of the dispenser. After all, the draft beer machine is an important process for beer to reach the customers. If it cannot be cleaned, the wine tube in the draft beer machine needs to be replaced.
The high noise of the draft beer machine may be the noise caused by the draft beer machine itself. , You need to replace the draft beer machine to the leading part of the wine tube. Remedy: re-fix or replace the sensor or thermostat.
If the compressor does not stop, it may be because the temperature inside the machine is not adjustable, and the sensor and thermostat are in poor contact or damaged.When in use, the draft beer machine often fails due to improper operation and use environment
...
|
