Bonding process: Wipe the surface to be adhered with acetone or ethanol solution, dry, apply T530 glue directly on the surface to be adhered, bond and apply pressure to bond, and it will be adhered firmly in 5-10 minutes. Bonding process: wipe the surface to be adhered with acetone or ethanol solution, and dry; brush the surface to be adhered with primer P-10, and dry (3~5min); use super glue SG-506 to quickly bond Connect, 3~8s to stick firmly.

They are typical and conventional, but they are also conservative. Their advantage is that the total time from workpiece processing to bonding to use does not exceed 10 minutes, and their shear strength can be as high as 9-16kg/cm2. The processing and bonding time of a workpiece takes at least 24 hours, and it is possible that this workpiece is in the entire product production cycle.

SG-P-10 Adhesive This adhesive is a two-component, solvent-based adhesive bond composed of primer P-10 and instant super glue SG-506, suitable for PTFE and PTFE workpiece materials Fast bonding.Sodium naphthalene solution treatment bonding method, sodium liquid ammonia solution treatment bonding method, and surface bonding without special treatment are three types of bonding methods. Only a few hours or even a few minutes are occupied in the schedule.

T530 adhesive The adhesive is a one-component, solvent-based adhesive, suitable for self-adhesive PTFE and PTFE or PTFE and stainless steel mutual adhesion.. From the perspective of efficiency, they are obviously not ideal, because fast-paced and high efficiency are very important in modern production. They have a common disadvantage: bonding It takes a PTFE Coated Fabric long time and the process is complicated. So, is there a simpler and faster bonding method? Here are two new adhesives, which can solve this problem well