The forks are stacked in a staggered manner to ensure that the gap between the forks is equal. The main reason that butter cannot be used as a lubricant is that the fluidity of butter is not very good at room temperature, and the roller needle can only rotate in place when working, and cannot play any role in the universal coupling.

When naming a coupling according to its structural features, it is necessary to distinguish it from similar couplings. When adding lubricant to a universal joint, which one should I choose? My suggestion here is that gear oil should be added to the universal coupling.

In the mass production of SWC universal couplings, if there is a problem with the processing of flange forks, the forks are cast steel parts, and each outer circle and flange end face need to be processed. The four-jaw single-action chuck of a lathe can only use two jaws and cannot be clamped. This will have a certain impact on the production efficiency of the universal joint and result in a lower output.

The company has rich experience and successfully developed SWC cardan shaft series. According to the introduction of the universal coupling manufacturer, they need to name each coupling after it is produced. They need to name the coupling according to this principle so that users can understand the performance characteristics of the coupling by name. Wholesale Interpart Axle manufacturers According to the actual design, our company has installed a complete and reasonable sealing device, which reduces the number of refueling, ensures the lubrication of the workpiece, and extends the service life.

This method can greatly improve the measurement accuracy. is a high-tech private enterprise in China's metallurgical industry, specializing in the production of SWC cross universal joints

dojcvjointn