| China Huanrun Micro Beer...microbeer |
The tank wall uses an advanced plate evaporator to directly exchange heat and cool with the milk - 2020年12月09日(水)
The tank wall uses an advanced plate evaporator to directly exchange heat and cool with the milk. The two refrigeration plates are respectively controlled by two sets of refrigeration compressors, which can work independently or at the same time to ensure that the milk is cooled quickly and evenly without icing. When milk is stored for a long time, if the milk temperature in the tank is higher than 6 ℃ (adjustable), the compressor will automatically start and cool, and stop automatically when the milk temperature in the tank drops below 4 ℃ (adjustable) , So as to achieve the purpose of cold preservation.
In case of the above-mentioned faults, the circuit will be automatically disconnected, an alarm will be issued, and the compressor will stop working. The refrigeration performance level conforms to ISO5708-1983A�� to ensure high quality milk. You must check at this time After troubleshooting, you can press the reset button to continue working. The direct cooling milk storage tank adopts fully automatic control, and the electric control box can be installed on the side or near end of the milk tank for easy automatic control. The milk tank is a horizontal elliptical body, and polyurethane rigid foam board is used between the inner and outer tank bodies.
It is more suitable for manually dispersed milking farms, milk collection stations, and dairy plants to cool, collect and store fresh milk. At this time, the agitator will enter an adjustable intermittent rotation. The compressor has high-pressure pressure fault protection and motor overload protection (high-pressure protection value is 2. TWZC type direct cooling milk tank is made of imported or high-quality SUS304 stainless steel. The product has beautiful appearance, compact structure, high degree of automation and small floor space.Direct cooling milk tank is an important supporting equipment for mechanized milking in pastures. Below we briefly introduce the knowledge of the direct cooling milk tank. It is clean and hygienic, and corrosion-resistant, and is precisely polished to prevent dirt from accumulating.
The milk tank equipment is combined with the electrical control box to automatically control the temperature of the refrigeration system. Because the insulation layer is filled with rigid foam material with low thermal conductivity, it is light in weight and excellent in insulation performance. At present, the direct cooling milk tank has been widely recognized and applied.0MPa, low-pressure shutdown value is 0. It not only saves energy, but also can keep the milk at low temperature for a long time. This product has advanced design and manufacturing technology, reliable performance, and its cooling, heat preservation performance and hygiene standards are in line with the international advanced level.
The refrigeration compressor adopts the TAGZ4573THR compressor produced by the French import TLCUMSEH (Taikang) company, and is equipped with a reliable midpoint protector, which will not burn the motor due to overload or system failure. The direct cooling milk tank is mainly composed of five parts: tank body, mixer, scrubber, refrigeration unit, and electrical control box. The stirring motor and the compressor work synchronously. The material has a low thermal conductivity, light specific gravity, high strength, low water absorption insulation layer, and good insulation performance.
The refrigeration plate has high refrigeration efficiency. When the milk tank needs to be pre-cooled, it can be turned on manually. When the compressor stops working, if fermentation tanks manufacturers necessary, the stirring switch can be set to automatic gear.2MPa)
...
|
