If it is stopped indirectly with a towel, the stitches will loosen when the sewing material is changed. When the stitch length is inconsistent, the chain stitch will become unstable; the towel stitch height is also inconsistent, the result of sewing is not ideal. Letters have a degree-biased column shape and also have a vertical-biased column shape. The teacher should stop making changes.

It is very easy to realize a pattern of hemming that is connected to the outside in a proper way. This kind of pulling force is lateral and not easy to see with the naked eye. Stretching and repairing can make the letters have the same height when embroidered on clothes.. In the vertical direction, the fabric will also be pulled together and make some exceptional letters appear shorter than the rest. When jumping from the beginning of the towel embroidery pattern, take two or three chain stitches before skipping stitches.

Therefore, the jump of the pattern in any place should be as short as possible (note: the stitches cannot be skipped by the entangling embroidery and the upper belt), and the stitch length must be consistent when making a pattern. The length of the stitch length should not be changed in the uniform pattern. This is stretch repair. If the stitches are skipped directly from the beginning of the towel embroidery, the embroidery thread will be taken up to spread the towel loop.

Otherwise, there will be jumpers, especially when the tangled rust and the upper belt are embroidered, the stitches will be piled up and the result will be unsightly. When the degree is biased toward the line, the high density will pull the lines together and make the letters look a little higher. This is because the embroidery needles move up and down during embroidery, and the base fabric is stretched to cause distortion, so the China Coiling Taping Embroidery Machines pattern is patterned. The abnormal letters are not equally high on the display.

When skipping stitches is necessary, some sewing materials will be deformed following the skipping. The larger supplement department requires more adjustments than the smaller supplement department. On weekdays, the change of its bias is greater than 90. This stretch interval is determined by the size of the supplement department.Embroidery pattern maker’s experience in plate making: the stitch length setting is different according to the thickness of the applied thread, the thickness of the sewing material and the stitch density required by the pattern. Prevent a sharp change in embroidery bias.

Usually use two or three needle chain stitches to realize the towel embroidery pattern. Letter patterns also need to be repaired. Do not set skip stitches when the pattern is embroidered, otherwise the towel loop will be caught by the needle. What the pattern maker has to do is to stretch the external supplements outward to connect with the edging, or adjust the edging slightly inward to connect with the outside