| China Huanrun Micro Beer...microbeer |
Open the air inlet valve slowly - 2020年11月18日(水)
At this time, the intake valve can be closed to stop steam supply. They are good equipment for food processing to improve stainless steel Bright beer tanks factory quality, shorten time, and improve working conditions.
At this point, once operation 3 is completed, and each operation is performed, the drain valve should be opened to drain the condensed water in the interlayer of the pot body. Only by paying attention to these during the use process can it prolong its service life. Open the air inlet valve slowly. When the material reaches the required temperature and the predetermined heating time, close the air inlet valve. Before feeding, inject a small amount of water into the jacketed pot, open the bottom ball valve, and then open the air inlet valve.
Clean the jacketed pot and put in the materials. There are many problems that should be paid attention to when using the steam jacketed boiler. For the vertical jacketed pot, the hand wheel can be turned to tilt the pot body and discharge materials.Jacketed pans are widely used in all kinds of food processing, and can also be used in large restaurants.
To keep it clean, it should be cleaned once every time it is used. Open the drain valve to release steam to make the pressure in the jacketed pot zero. If the amount of water in the interlayer is too large, check whether the steam trap drain is malfunctioning to ensure heat The exchange is carried out normally, so as not to extend the operation time and affect the work efficiency.
After the cold air in the jacket of the pot is exhausted, close the ball valve, and when the pressure gauge pointer rises to the jacketed pot setting When the working pressure is higher, the safety valve is adjusted so that it will automatically deflate when it reaches the pressure relief value specified by this equipment
...
|
